Terra Nova Roofing & Construction logoTerra Nova Roofing & Construction
Counter Flashing Β· Chimneys Β· Walls Β· Repair Guide

What Is Counter Flashing? A Repair Guide for NJ Homes

Counter flashing is the piece of metal that covers the top edge of the roof's flashing where the roof meets a chimney or wall, and it's one of the most common places North Jersey roofs leak. Here's what it does, how it fails, and how Terra Nova Roofing & Construction repairs it properly instead of smearing on more tar.

Licensed & insured β€’ NJ Lic. #13VH13824700 β€’ Locally owned in Garfield, NJ β€’ Free inspection with photos β€’ Hablamos espaΓ±ol

Text a close-up photo of the chimney or wall where it meets the roof to 973-200-1617. We can often tell you what's wrong from the photo.

  • βœ“ Same-day appointments often available
  • βœ“ Licensed & insured in NJ
  • βœ“ Homes & businesses
  • βœ“ English & EspaΓ±ol

What is counter flashing?

Counter flashing is a strip of metal set into or fastened to a chimney or wall that overlaps the top of the base or step flashing below it, so water running down the masonry or siding is shed onto the roof instead of behind the flashing. Terra Nova Roofing & Construction repairs and replaces counter flashing on North Jersey homes, cutting it into the mortar joints the right way. Standard roof repair from $950. Call or text 973-200-1617.

What is counter flashing and what does it do?

Counter flashing is the top layer of a two-part flashing system where a sloped roof meets a vertical surface. The bottom layer (step flashing or base flashing) is tucked under the shingles and turned up the wall. The counter flashing comes down from the wall and covers the top edge of that bottom layer like a cap.

Why two parts? Roofs and chimneys move differently. The roof framing expands, contracts and settles; a masonry chimney sits on its own foundation and barely moves. If one piece of metal were fastened to both, it would tear or pull loose. With two overlapping pieces, each part can move on its own while water still runs over the top of the joint and down onto the shingles.

  • Base or step flashing attaches to the roof and turns up the wall.
  • Counter flashing attaches to the wall or chimney and laps down over it.
  • Result: no exposed top edge for water to run behind.

More on flashing in general: roof flashing leak repair.

Counter flashing vs. step flashing: what's the difference?

They work together, but they're different parts with different jobs:

Step flashingCounter flashing
Attached toThe roof deck, woven in with each course of shinglesThe chimney or wall, set into mortar joints or a cut groove
ShapeIndividual L-shaped pieces, one per shingle courseLong pieces, often stepped to follow the brick joints on a chimney side
JobSends water that hits the wall onto the next shingle downCovers the top of the step or base flashing so water can't get behind it
Common failureRusted, missing or never installedPulled out of the mortar, loose, cracked sealant, bent
Replaced whenThe roof is replaced, or the area is opened for repairWhen it's damaged, or when the chimney is repointed or the roof replaced

Step flashing guide: step flashing repair. On siding walls, the step flashing is usually covered by the siding itself instead of separate counter flashing. See roof-to-wall flashing.

Where is counter flashing used on a roof?

🧱

Chimneys

The most common spot: down the sides (stepped), across the front (apron) and behind the chimney (back pan or cricket). See chimney counter flashing repair.

🏒

Masonry and stucco walls

Where a roof runs into a brick, block or stucco wall on a second story or neighboring building.

🟫

Flat roof parapets and walls

Over the membrane's base flashing at parapets and walls.

πŸ”²

Curbs and equipment

Over the base flashing on skylight curbs, hatches and rooftop units.

Types of counter flashing

How the counter flashing is attached to the wall makes the biggest difference in how long it lasts:

πŸ”ͺ

Reglet (cut-in)

A groove is cut into the mortar joint or masonry, the bent top edge of the flashing is set into it and sealed. The most durable approach on brick chimneys.

πŸͺœ

Stepped

Individual pieces follow the brick courses down the side of a chimney, each set into its own mortar joint.

πŸ“

Surface-mounted

Fastened to the face of the wall with a sealant bead along the top. Easier, but it depends on the sealant, which dries out and needs maintenance.

🧩

Two-piece / receiver

A receiver strip goes into the wall, and a removable counter flashing snaps in. Makes future roofing easier.

Signs counter flashing has failed

Counter flashing usually fails at its top edge, where it meets the masonry, rather than in the middle of the metal. Signs to look for:

  • Pulled out of the joint. The top edge has worked loose from the mortar, often because the mortar itself crumbled.
  • Cracked or missing sealant along the top of surface-mounted flashing.
  • Thick tar or roofing cement smeared over everything. Usually a sign of past leaks patched over rather than fixed. It dries, cracks and traps water. See flashing sealant failure.
  • Bent, lifted or loose metal after wind, ice or someone working on the chimney.
  • Rust or corrosion on older steel flashing.
  • Inside: a stain on the ceiling or wall next to the chimney, damp wood around the chimney in the attic, or water on the chimney's interior face during wind-driven rain.

Not every chimney leak is flashing. Water can come through a cracked crown, missing cap or porous brick. See crown leak vs. flashing leak. For a hidden or recurring leak around a chimney, we can use a thermal (infrared) roof scan (a paid service, priced up front) to see where moisture is collecting.

How do you repair counter flashing?

A lasting counter flashing repair means resetting or replacing the metal into the masonry, not adding sealant on top. The steps we follow:

1

Inspect the whole system

Check the counter flashing, the step and base flashing under it, the shingles, the mortar and the chimney crown, so we fix the actual cause.

2

Remove old patches

Strip off old tar and failed sealant so we can see the metal and joints.

3

Open the joint

Grind out the mortar joint (or cut a clean reglet) to the right depth for the flashing's top edge.

4

Install new counter flashing

Bend the new metal to fit, set the top edge into the joint, and step it down the chimney sides so it laps over the step flashing.

5

Seal and secure

Wedge and seal the joint with a sealant made for masonry and metal. No fasteners through the lower flashing.

6

Check the rest

Replace damaged step flashing, apron and back pan as needed, and add or repair a cricket behind wide chimneys. See chimney cricket repair.

How much does counter flashing repair cost?

Most counter flashing repairs fall under our standard roof repair. You get the exact price in writing before any work:

ServiceStarting priceTypical counter flashing jobs
Roof leak repairFrom $650Resetting a short loose section, resealing a small area
Standard roof repairFrom $950New counter flashing on a chimney, re-flashing a roof-to-wall joint
Emergency roof leak serviceFrom $1,500Active leak at the chimney with temporary dry-in, then the permanent fix
Rotted decking / hidden damageExtraSoft wood around the chimney from long-term leaking

What moves the price: chimney size and height, roof pitch, how many sides need new metal, whether step flashing and the cricket need work too, and the condition of the mortar. More: chimney flashing cost factors.

Repair counter flashing or replace it with the roof?

If the roof is in good shape, counter flashing can be repaired or replaced on its own. If the roof is near the end of its life, it's usually smarter to do all the flashing with the roof replacement so you're not paying twice to work around the chimney.

  • Repair alone when the shingles are sound and only the counter flashing or sealant has failed.
  • Repair counter and step flashing together when the step flashing underneath is rusted or missing; that means lifting shingles along the chimney.
  • Replace with the roof when the shingles are worn, curling or leaking elsewhere. On a replacement we tear off to the deck, install ice & water barrier around the chimney and at the eaves and valleys, synthetic underlayment, and new step, apron, counter flashing and back pan. Most residential replacements take 1–3 days.

If the chimney's brick or crown needs rebuilding, we'll tell you honestly so you can bring in a mason. Financing is available for larger projects; options and terms depend on the project and approval. Hablamos espaΓ±ol.

What homeowners say about us

β˜…β˜…β˜…β˜…β˜… 5-star rated on Google

EXCELLENT
Google star 1Google star 2Google star 3Google star 4Google star 5
Based on 21 reviews
Posted on Google Google
Erick Sanchez profile picture
Erick Sanchez
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Wonderful service, incredible work, and top-notch communication!!! Highly recommended.
Posted on Google Google
Susan Keegan profile picture
Susan Keegan
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Terranova roofing is great. Very honest and friendly. They are knowledgeable and will tell you exactly what is needed. Reliable and on time. I highly recommend them and would definetly use them again.
Posted on Google Google
E.M G. profile picture
E.M G.
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
My roof was leaking, David gave me an estimate, I said yes right away, and they did a great job. The crew was super polite and really paid attention to the details. It couldn't have been a better experience.
Posted on Google Google
Daniel Garcia profile picture
Daniel Garcia
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
David is amazing to work with. Very responsive. His crew worked hard to get my parents roof fixed. Highly recommend. 10 ⭐️
Posted on Google Google
Davis Pinto profile picture
Davis Pinto
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Want to thank David and his crew on working on roof. They all were very professional and taking there time on fixing the roof. No cutting corners what so ever. I highly recommend Terra Nova Roofing. Great prices. I will be using them again in the future for any leaks or damage on the roof. Once again thanks
Posted on Google Google
Jesus Flores profile picture
Jesus Flores
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Great roofing company, replaced my roof. Highly recommend them!!!
Posted on Google Google
Joao Macavilca profile picture
Joao Macavilca
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Came by and was able to get us best pricing and did an amazing job! Highly recommended

Get Your Counter Flashing Inspected

We'll check the counter flashing, step flashing and chimney, show you photos of what we find, and give you a written estimate with the exact price.

Call us when

  • A stain appears next to the chimney
  • Flashing is loose or pulled out of the brick
  • The chimney is covered in old tar
  • Water shows up in wind-driven rain
  • You're replacing the roof and want the flashing done right
πŸ“ž Call 973-200-1617

Request your free estimate

Fill this out and a member of our team will follow up within one business day.

Step 1 of 2
Checkboxes

βœ“ No-obligation quote Β· βœ“ Licensed & insured Β· βœ“ Your info is never shared

Counter Flashing Questions

What is counter flashing?

It's metal set into or fastened to a chimney or wall that laps down over the top of the step or base flashing, so water can't run behind it.

What's the difference between counter flashing and step flashing?

Step flashing is attached to the roof and woven with the shingles; counter flashing is attached to the chimney or wall and covers the top of the step flashing.

Can counter flashing be repaired without replacing the roof?

Yes, if the shingles are in good shape. We reset or replace the counter flashing and repair step flashing as needed.

Is caulk or roofing tar enough to fix it?

Usually not for long. Sealant dries and cracks; the lasting fix is metal set properly into the masonry.

How much does counter flashing repair cost?

Most jobs fall under standard roof repair, from $950; small fixes start at $650. You get the exact price before any work.

How long does a counter flashing repair take?

Most are done in a single visit. If step flashing or a cricket needs work too, it can take longer.

Do I need to be home?

Not usually for the outside work. It helps for the first inspection so we can see any interior stain or the attic around the chimney.

What happens if it rains during the repair?

We only open what we can close the same day and keep tarps on hand. The area is sealed before we leave.

Will insurance cover a counter flashing leak?

Usually not if the flashing simply aged or the mortar wore out. If a storm damaged it, it may be covered. We never promise outcomes.

Is financing available?

Financing is available for larger projects like a roof replacement. Options and terms depend on the project and approval.

What does the free estimate include?

An inspection of the flashing, chimney and roof, photos of what we find, and a written estimate with the exact price.

ΒΏHablan espaΓ±ol?

SΓ­, hablamos espaΓ±ol. Llame o mande texto al 973-200-1617.

Our service area

Bergen County

973-200-1617

Essex County

973-200-1617
  • Belleville
  • Bloomfield
  • Caldwell
  • Cedar Grove
  • East Orange
  • Essex Fells
  • Fairfield
  • Glen Ridge
  • Irvington
  • Livingston
  • Maplewood
  • Millburn
  • Montclair
  • Newark
  • North Caldwell
  • Nutley
  • Orange
  • Roseland
  • Short Hills
  • South Orange
  • Verona
  • West Caldwell
  • West Orange

Hudson County

973-200-1617
  • Bayonne
  • East Newark
  • Guttenberg
  • Harrison
  • Hoboken
  • Jersey City
  • Kearny
  • North Bergen
  • Secaucus
  • Union City
  • Weehawken
  • West New York

Union County

973-200-1617
  • Berkeley Heights
  • Clark
  • Cranford
  • Elizabeth
  • Fanwood
  • Garwood
  • Hillside
  • Kenilworth
  • Linden
  • Mountainside
  • New Providence
  • Plainfield
  • Rahway
  • Roselle
  • Roselle Park
  • Scotch Plains
  • Springfield
  • Summit
  • Union
  • Westfield

Morris County

973-200-1617
  • Boonton
  • Butler
  • Cedar Knolls
  • Chatham
  • Denville
  • Dover
  • East Hanover
  • Florham Park
  • Hanover
  • Kinnelon
  • Lincoln Park
  • Madison
  • Mendham
  • Montville
  • Morris Plains
  • Morristown
  • Mountain Lakes
  • Parsippany
  • Pequannock
  • Randolph
  • Riverdale
  • Rockaway
  • Roxbury
  • Whippany

Updated November 2026 by the Terra Nova Roofing & Construction team, Garfield, NJ β€’ NJ Lic. #13VH13824700

Scroll to Top